![]() This patina may be created by leaving the truck exposed to the elements, driving the truck in rough terrain, or adding a protective coating to the exterior of the vehicle. What’s a patina truck?Ī patina truck is an older model of vehicle that has been intentionally left untouched for a period of time to give it a certain patina, or natural surfacing, that creates a unique and eye-catching look. When complete, the car should be sealed, protected, and looking shiny. Once the second coat of sealant has dried, apply a detailing wax to create a glossy finish. Make sure to cover the entire car paying close attention to the corners.Īllow the sealant to dry fully before applying a second coat. ![]() Begin by spraying the sealant onto the surface using even strokes. Once the surface has been cleaned and prepped, the sealant can be applied.ĭepending on the product being used, the sealant may come in a spray bottle or a roll-on applicator. After sanding, wipe down the surface with a microfiber cloth. Once the car is completely dry, sand the entire surface with a 220-grit sandpaper in a circular motion. Using a water hose and a cleaning agent, wash the entire car making sure to remove any dirt, debris, and oil deposits. Before applying any sealant, the car should be thoroughly cleaned. Sealing a patina car requires special attention and care, as it is not a normal paint job. Rat rods are popular among car enthusiasts for their creative designs as well as for their affordability, since many of the parts used can be found at swap meets, flea markets, junkyards and other sources for inexpensive parts. Rat rods often feature engines, parts, and bodies from different makes and models, and may feature a combination of traditional car building techniques with other materials, such as found objects and scrapyard parts, to give it a unique look. Traditionally, these cars get their name from the idea that the car is “ratted,” or put together with whatever materials are easily available. The term ‘rat rod’ generally refers to a type of custom vehicle that is typically built by combining vintage car parts to create a unique and often quirky-looking ride. What is the difference between rust and patina?.Regardless of the spraying method, to get the best results, keep the sprayer at a set distance from the truck (usually around 8"), avoid drips, and apply nice and evenly. You defiantly have to be using a thin auto paint for this to work. So, if you can, I'd recommend using something like the preval brand spray gun, but if you can't, I found a regular hand powered spray bottle worked nicely. So while the four dollar system is very cheap, by the time I pay shipping and handling, and wait around for it to be delivered. Except, as it turns out, the ones near me. Its a great system that aerosolizes anything, is easy to clean and available at nearly any stores. ![]() My initial plan was to use these little cheap-o sprayers from the hardware store. To make this color, I used silver (5 parts), blue (1 part) and yellow (1 part). Here, were going to apply our top color layer- for this truck, I went with a teal-green color. If you're starting to panic because it's looking like you ruined your truck, rest easy - it's going to start looking better after this step. But again, we're after a pretty thick layer and want that texture. ![]() To actually apply the red-oxide layer, brace yourself once again, you're going to need a roller. I give my truck a rinse with solvent before each paint coat. It's not essential for this layer, as we are going to be putting more paint on top, but keep it in mind for the final coats.īecause I live on a gravel road, the dust levels are pretty intense. I mix up a quart of color at a time and keep it in a sealed container until I'm ready to use it. Even if you use a paint measuring cup (which you should be using), there will be a bit of variation between batches. It's not essential, especially at this layer, but its a good idea to mix enough to cover the entire car before your start painting. To make this color, I used a combination of hugger orange and black (4 parts orange to 1 part black). Most of the older cars used a red-oxide primer, which is what we're going to duplicate here. The next step is to put a layer of red-oxide colored paint over the base coat. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |